ME050 FR Breather Membrane (ALU)
Class A2, W1 Façade Membrane
ME050 FR Breather Membrane (ALU) is a reflective breather membrane which is Class A2-s1, d0 in accordance with EN 13501-1 and water resistant to Class W1 in accordance with EN 13859-2. The membrane is supplied with integrated adhesive strips at the top and bottom of the roll, which are used to seal horizontal overlap joints without the requirement for an additional seal tape.
FR Breather Membrane (ALU) ME050 meets the fire performance requirements for membranes installed on “relevant and higher risk” building types as defined in Approved Document B of the Building Regulations for England and Wales.
Safety data sheet must be read and understood before use.
- Class A2-s1, d0 to EN 13501-1
- UV resistant for 9 months fully exposed and permanent when covered (including open joints max. 50 mm)
- Wind and driving rain resistant
- Highly breathable with an Sd value of < 0.12 m
- Highly airtight - Passiv Haus standards can be achieved
- High temperature resistance
- Class W1 water resistance
- Integrated self adhesive strips
| FR Membrane Self Adhesive - Installation Guide Issue 2 (en-GB).pdf | Application Instructions | |
| ME050 Declaration of Performance UKCA (en-GB).pdf | Declaration of Performance | |
| ME050 Safety Data Sheet (en-GB).pdf | Safety Data Sheets | |
| ME050 Environmental Product Declaration (en-GB).pdf | EPD | |
| IB_ME050_datasheet_FR Breather Membrane (ALU)_en-GB_v15.pdf | TDS |
